Injector Dynamics 1000cc Saturated Fuel Injector

Starting at: $118.00

FREE GROUND SHIPPING IN THE CONTINENTAL US!! Bosch's newest generation injectors are now available in a 1000cc saturated injector, after modification and flow matching from Injector Dynamics!!


PRICE IS PER INJECTOR, BE SURE TO ORDER 4 IF YOU HAVE A 4 CYLINDER ENGINE!

Features

* High Impedance, no need for injector drivers or injector resistors
* High pressure capability, All injectors will run comfortably at 100psi above 10v, flow will be increased by approximately 50% at 100psi
* High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
* Excellent low pulsewidth response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulsewidth response can be linearized to practically zero flow.
* Good atomization, Droplet size of the 1000cc injector is comparable to the Siemens Mototron 60lb injector, and is far better than the Multec 95lb, Standard Motor Products (RC) 1000cc and Siemens 72 and 83lb injectors.
* Excellent consistency, no sets will require more than a 1% trim
* Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

These are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length and adapt them to 11mm (B series) or 14mm (K series) orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail. These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other 1000cc injector on the market. The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level.

Price is per injector and includes the adaptor for the top and an injector clip with pins

Now available: Optional Plug and Play Injector Plugs, fits your stock OBD0 or OBD1 injector plugs, no wiring necessary!

Please choose your engine type below when purchasing.


Add to Cart:

  • Manufactured by: Injector Dynamics

Please Choose:






 
Your IP Address is: 18.206.16.123
Locash Racing, LLC
2853 S. 44th St. #102
Phoenix, AZ 85040
602-763-5189
Copyright © 2019 Locash Racing.
Powered by Locash Racing